Introduction The Configuration UI is the graphical user interface (GUI) for setting up the Treon Gateway, Treon Gateway 2 and Treon Gateway in Protective Enclosure. This article explains Configuration UI version 2.
Introduction The Configuration UI is the graphical user interface (GUI) for setting up the Treon Gateway, Treon Gateway 2 and Treon Gateway in Protective Enclosure. This article explains Configuration UI version 2.
Introduction The Configuration UI is the graphical user interface (GUI) for setting up the Treon Gateway, Treon Gateway 2 and Treon Gateway in Protective Enclosure. This article explains Configuration UI version 2.
Enabling Debug Logs To follow this guide you will need to connect to the Gateway with SSH
In case more detailed logs are needed when troubleshooting or verifying the cloud adapters, you can enable debug logs by creating a .
For Treon Aito Release 6.5 for Gateway When using gateway in a closed network (no internet access) ping can be disabled or the ping address can be changed to an internal address that will answer ping (ICMP), so that the green LED responds to the success/failure of the internal networking instead of being permanently red.
Introduction From Treon Aito Release 7.1 for Gateway onward, it is possible to enable sending telemetry data from the nodes in the mesh network to the MQTT broker. This can be very helpful in monitoring the deployment quality and performance of the mesh network.
Introduction The Treon Gateway can be connected to the the internet via a wired ethernet connection, Wi-Fi or a cellular (SIM) connection.
Connection priority The connection priority determines the order of connection method the Treon Gateway tries to connect in to the network.
Introduction The Treon Gateway can be connected to the the internet via a wired ethernet connection, Wi-Fi or a cellular (SIM) connection.
Connection priority The connection priority determines the order of connection method the Treon Gateway tries to connect in to the network.