Ethernet connection Treon Gateway & Treon Gateway 2 You can establish an ethernet connection simply by attaching an ethernet cable to the Treon Gateway (QuickStart Guide item D).
Ethernet connection Treon Gateway in Protective Enclosure For establishing an ethernet connection with the Treon Gateway in Protective Enclosure, you need to open up the enclosure to gain access.
Introduction Before and after the deployment of a mesh network, it is important to test and troubleshoot common issues in deployment.
Testing the Network Before you install the physical devices at the deployment site, first perform a dry-run of the system to test if the network runs.
Introduction Before and after the deployment of a mesh network, it is important to test and troubleshoot common issues in deployment.
Testing the Network Before you install the physical devices at the deployment site, first perform a dry-run of the system to test if the network runs.
Introduction Before and after the deployment of a mesh network, it is important to test and troubleshoot common issues in deployment.
Testing the Network Before you install the physical devices at the deployment site, first perform a dry-run of the system to test if the network runs.
Introduction If you are trying to do advanced work on the Treon Gateway, Treon Gateway 2 and Treon Gateway in Protective Enclosure that cannot be done via the Configuration UI, you need to connect via an SSH connection.
Introduction Your Treon Connect Test Kit gateway typically comes equipped with a SIM card operational in your country.
Additionally, all Treon Gateways can be connected to the the internet via Ethernet connection or Wi-Fi.
Introduction In Treon Aito Release 7.0 for Gateway and higher, it is possible to enable sending telemetry data from the Treon Gateway to your MQTT cloud.
Please also see the full JSON specification according to JSON Schema.
Introduction This article describes how to update Treon Gateway and Treon Gateway 2 software via DM commands.
For a full guide on working with DM Commands on the Treon Gateway, please read this article.
Introduction This article describes how to update your Treon Aito Release for Gateway via DM commands.
For a full guide on working with DM Commands on the Treon Gateway, please read this article.
No connection via SIM card If the Treon Gateway has a SIM card in its SIM card slot but does not connect to the network (indicated by a red status light), there are several possible root causes.