The following diagram shows the basic workflow of Treon Connect:
Treon Sensors capture temperature and vibration data from the equipment (the Assets) and transmit it to the Treon Gateway.
The Treon Gateway sends this data to the Treon Connect backend via its internet connection.
Your Treon Connect application is structured in the following way:
TREON CONNECT → GROUP → ASSET → SENSOR → POSITION
The following table explains the Treon Connect concepts and terminology you need to know to get started with Treon Connect:
Introduction Your Treon Connect Gateway 2 in Protective Enclosure is typically supplied with a SIM card that is operational in your country.
All Treon Gateways can also connect to the internet via Ethernet or Wi-Fi.
Introduction This article explains how to mount the Treon Industrial Node C on assets.
The Treon Industrial Node C is mounted on monitored equipment by gluing it.
Sensor location It is important to consider the location of the sensor and the contact between the sensor and the equipment, when mounting it to monitored equipment.
Introduction For your Treon Gateway to be able to transmit data to your Treon Connect platform, the gateway needs to be connected to the internet.
The Treon Gateway supports the following methods for establishing an internet connection:
Introduction The Treon Connect Condition Monitoring app allows you to set up warning and alerts to warn you in case specific pre-defined conditions are met. This can be used for condition monitoring to e.
Introduction The Treon Connect Events app gives an overview of all warning and alerts. You can also see the events in the Condition app in the Trends (KPI) data timeline when the feature has been activated.