This article describes the process of updating your Treon Industrial Nodes and Industrial Nodes 6 to the latest Treon Aito Release for Industrial Node via Device Management (DM) interface.
DM commands get, set, and execute are used for this procedure.
Introduction This article describes how to update Treon Gateway and Treon Gateway 2 software via DM commands.
For a full guide on working with DM Commands on the Treon Gateway, please read this article.
Introduction This article describes how to update your Treon Aito Release for Gateway via DM commands.
For a full guide on working with DM Commands on the Treon Gateway, please read this article.
Introduction This article describes the update process for your Treon Gateway, Treon Gateway 2 or Treon Gateway in Protective Enclosure via Configuration UI.
**Please Note: In case you have a custom Treon Gateway software configuration, please contact Treon Support.
Introduction This article describes the update process for your Treon Gateway, Treon Gateway 2 or Treon Gateway in Protective Enclosure via Configuration UI.
**Please Note: In case you have a custom Treon Aito Release for Gateway configuration, or you are not sure which Treon Aito Release for Gateway version to install, please contact Treon Customer Support.
Welcome to the Treon Knowledgebase Update section for Treon Gateways
Here you will find information on how to update the Treon Gateway, Treon Gateway 2 and Treon Gateway in Protective Enclosure.
Welcome to the Treon Knowledgebase Update section for Treon Gateways
Here you will find information on how to update the Treon Gateway, Treon Gateway 2 and Treon Gateway in Protective Enclosure.
This article gives the update link and the release notes for the Treon Aito Release 7.3.2 for Gateway.
Update Link for Gateway 1 Update link:
https://debug.treon.fi/treongw1-v7.3.2.20241009140751/treongw-image-iotgw_7.3.2.20241009140751.tar
Command line:
fwupdate-run --use-device-cert https://debug.