Legacy
This section preserves documentation from the previous knowledge base. It describes older Treon products and manual configuration workflows — the Aito-era gateway platform, the Treon Industrial Node and Node 6, and Treon Connect 1.8.5.
Not maintained
Nothing in this section is kept current against Treon Connect releases. Where a topic is also covered elsewhere in this knowledge base, the other page is authoritative — this one is history. Screenshots, menu names and product names here will not match what you see today.
It is here because the material still answers questions that the current documentation does not: manual mesh and gateway configuration, DM commands, backend MQTT interfaces, and the condition monitoring workflow as it was in Treon Connect 1.8.5.
What's in here
- Manual configuration of Treon products — the gateway platform and its configuration UI, connectivity, advanced gateway options, the Treon Industrial Node and Node 6, node configuration and DM commands, default configurations, and backend interfaces.
- Treon Connect 1.8.5 — Module 2, Condition monitoring — mesh deployment, node installation methods, condition monitoring measurements and events as documented for that release.
Where to look instead
| For | See |
|---|---|
| Current gateway installation and connectivity | Treon Gateway |
| Current sensors | Treon Industrial Node X, Treon Industrial Node C |
| Current mesh planning | Network |
| Current measurement configuration | Configuration |
| Current condition monitoring | Condition |