Passthrough Parser

Legacy documentation

This page is preserved from the previous knowledge base and describes older Treon products and manual configuration workflows. It is kept for reference and is not maintained against current Treon Connect releases.

Caution! Article for developersInformation on this page is intended particularly for users with advanced technical knowledge.

Passthrough Parser

Treon Gateway Treon Gateway 2 Treon Gateway in Protective Enclosure

Introduction

The Passthrough Parser is a feature that forwards data from third party sensor nodes in your Wirepas ecosystem to your backend via the Treon Gateway, Treon Gateway 2 or Treon Gateway in Protective Enclosure.

Implementation

To use the Passthrough Parser feature, you need to add or modify the configuration files in /opt/iotgw/conf.d

1.

Log in to the Treon Gateway via SSH.

1.

Use the following command to create a new file called in conf.d with root privileges:

sudo nano /opt/iotgw/conf.d/passthrough.conf"

`` 1.

Add the following text to the file: [PassThrough] DataParser: passthrough

Whitelist of Wirepas destination endpoints. Comma separated list

MeshTopicFilter:

[Startup] DataProcessors3 += PassThrough

Under “MeshTopicFilter:” you need to add all Wirepas endpoints you wish to send to backend. This is a whitelist to avoid receiving all the diagnostic data.

1.

Save the file with Ctrl+s and exit with Ctrl+x.