Skip to content

Treon Asset Node

Legacy documentation

This page is preserved from the previous knowledge base and describes older Treon products and manual configuration workflows. It is kept for reference and is not maintained against current Treon Connect releases.

This article shows the default configuration of the Treon Asset Node.

ID Description Reporting Interval minutes Temperature Shock BT Beacon
Status Alert Alert Level Status
0 All Off OFF OFF OFF OFF OFF OFF
1 Test profile 5 Min set OFF ON OFF ON
2 Temperature monitoring 15 Full set OFF OFF OFF OFF
3 Temperature monitoring 60 Full set OFF OFF OFF OFF
4 Freezer monitoring 15 Full set < -31 or > -15 Min set in 5 min interval OFF OFF OFF
5 Freezer monitoring 60 Full set < -31 or > -15 Min set in 5 min interval OFF OFF OFF
6 Refrigerator monitoring 15 Full set < 0c or >8c Min set in 5 min interval OFF OFF OFF
7 Refrigerator monitoring 60 Full set < 0c or >8c Min set in 5 min interval OFF OFF OFF
8 Shock Monitoring (low) OFF OFF OFF ON >=15G OFF
9 Shock Monitoring (low) 30 Full set OFF ON >=15G OFF
10 Environmental and Shock monitoring 15 Full set OFF ON >=15G OFF
11 Environmental and Shock monitoring 60 Full set OFF ON >=15G OFF
12 Refrigerator and Shock monitoring 15 Full set < 0c or >8c Min set in 5 min interval ON >=15G OFF
13 Refrigerator and Shock monitoring 60 Full set < 0c or >8c Min set in 5 min interval ON >=15G OFF
14 Intrusion Alert 30 OFF OFF OFF OFF OFF
15 Shock Monitoring (high) OFF OFF OFF ON >=40G OFF
16 Shock Monitoring (high) 30 Full set OFF ON >=40G OFF
17 Rapid light 5 OFF OFF OFF OFF OFF
18 Refrigerator monitoring (meat and fish) 15 Full set < 0c or >4c Min set in 5 min interval OFF OFF OFF
19 Refrigerator monitoring (meat and fish) 60 Full set < 0c or >4c Min set in 5 min interval OFF OFF OFF

Notes: Full set = Current, Min, Max and Average values Min set = Current value Temperature measurement interval is 5 min